Dedicated to Quality Engineering

AMT3000 and AMT5000 AM Radio Broadcast Transmitter Kits

Setting the Quality Standard for High Quality, Low Power, FCC Part 15 Transmitters

 

Home

Catalog Page

Contact Us

 

High Quality FCC Part 15 Compliant AM Transmitter Kits

 

Uses

Broadcast audio from CDs, MP3s, internet radio, satellite radio, cable radio, FM radio or any other audio source to AM radios in your home, yard, neighborhood or around your business location.

No FCC License Required

 

Independent Reviews of SSTRAN Products

A Great YouTube Video From a Customer

RadioIntel.com Review by Jay Allen

UK Vintage Radio (www.vintage-radio.com)

Popular Communications Magazine

 

Customer Feedback

What Our Customers Are Saying...

 

Useful Information for Optimizing Performance

Fixing Low Power AM Transmitter Hum Problems

 

 

Products

 

AMT3000 - High Fidelity Low Power AM Radio Transmitter Kit

 

AMT5000 - High Efficiency Pro AM Radio Transmitter Kit New!

 

(Click above to navigate to product on this page)

 

 

AMT3000 - High Fidelity Low Power AM Radio Transmitter Kit

 

Overview >

Details >

Specifications >

 

  • The original, highly acclaimed AMT3000 kit everyone has been talking about since 2003.
  • Legal to use in the US without FCC license (complies fully with FCC Part 15 regulations)
  • Tuning range (dependent on model number):

530 to 1700 kHz in 10 kHz steps or

522 to 1710 kHz in 9 kHz steps

  • Constant 100 mW input power regardless of load or tuning
  • 100% Modulation
  • 20Hz to 20kHz 1 dB audio response, low distortion
  • Jumper option for treble boost to compensate for restricted bandwidth of typical receivers
  • On-board audio compressor/limiter with front panel controls
  • The single surface-mount IC is pre-soldered on the board
  • High quality enclosure, PC board and components
  • Includes enclosure, 120VAC to 18VAC AC wall adapter, antenna and ground wires, and comprehensive instruction manual.

 

 

Models and Prices

 

AMT3000

10 kHz channel spacing for use inside North and South America. Includes enclosure and 120 Volt AC Adapter. The single surface-mount IC is pre-soldered on the board.

Price: $92.95

 

AMT3000-9K

9 kHz channel spacing for use outside North and South America. Includes enclosure and 120 Volt AC Adapter. The single surface-mount IC is pre-soldered on the board. *

Price: $92.95

 

AMT3000-9KNT

Same as AMT3000-9KSM, except the US-standard 120 Volt AC Adapter is not included. **

Price: $88.95

 

Buy

 

 

 

AMT5000 - High Efficiency Pro AM Radio Transmitter Kit

 

Overview >

Details >

Specifications >

Air Check >

 

  • Designed to equal or exceed the range and audio quality of all other FCC Part 15 AM transmitters currently being sold at any price
  • Ultra-high 98% Class E RF output transistor efficiency
  • On-board low-loss toroid antenna tuning coil optimized for 1350 kHz - 1710 kHz
  • 100% modulation, capable of 130% positive modulation when using external asymmetrical audio processor
  • Input power adjustable to allow setting to 100 mW for varying antenna/ground load conditions
  • Audio inputs: Consumer Audio and Pro Audio (balanced).
  • Legal to use in the US without FCC license (complies fully with FCC Part 15 regulations)
  • Tuning range (dependent on model number):

530 to 1700 kHz in 10 kHz steps or

522 to 1710 kHz in 9 kHz steps

  • On-board audio compressor/limiter with front panel controls
  • 20Hz to 20kHz 1 dB audio stage response with very low distortion
  • Jumper option for treble boost to compensate for restricted bandwidth of typical receivers
  • Static surge protection on antenna and Pro Audio lines
  • Capable of operating from the standard 12VAC wall adapter, a 15VDC wall adapter or a 12VDC battery
  • All surface-mount ICs (three) are pre-soldered on the board
  • High quality enclosure, PC board and components
  • Includes enclosure, 120VAC to 12VAC wall adapter, antenna and ground wires, and comprehensive instruction manual.

 

 

Models and Prices

 

AMT5000

10 kHz channel spacing for use in North and South America. Includes enclosure and 120 Volt AC Adapter. All surface-mount ICs are pre-soldered on the board.

Price: $229.95

 

AMT5000-9K

9 kHz channel spacing for use outside North and South America. Includes enclosure and 120 Volt AC Adapter. All surface-mount ICs are pre-soldered on the board. *

Price: $229.95

 

AMT5000-9KNT

Same as AMT3000-9K, except the US-standard 120 Volt AC Adapter is not included. **

Price: $224.95

 

 

Buy

 

 

 

* User-supplied AC adapter information:

 

AMT3000

Output may be either AC or DC. AC output voltage should be rated between 15 - 20 VAC. DC output voltage should be rated between 20 - 24 VDC. Adapter should be rated for at least 200 mA output current.

 

AMT5000

Output may be either AC or DC. AC output voltage should be rated at 12 VAC. DC output voltage should be rated at 15 VDC. Adapter should be rated for at least 200 mA output current.

 

** The US-standard AC adapter will work in the following countries:

Bahamas, Barbados, Barbuda, Bermuda, Canada, Cayman Islands, Colombia, Costa Rica, Dominican Republic, Ecuador, Guam, Haiti, Honduras, Jamaica, Japan, Mexico, Micronesia, Montserrat, Nicaragua, Palau, Puerto Rico, Saba and Saba (St.Eustatius), Taiwan, Trinidad, Tobago, Turks/Caicos Islands, United States of America, Venezuela, and Virgin Islands.

 

Shipping:

Price does not include shipping charges. You pay only actual shipping charges with no added handling fees. During checkout, you will be prompted to select your desired shipping method from the United States Postal Service (USPS) shipping options. Shipping costs are displayed for the various shipping options.

 

Tax:

Pennsylvania residents will be charged 6% sales tax.

 

 

Payment Options

Pay by credit card through PayPal.

Pay by check or money order.

Solution Graphics

 

SSTRAN Home Page

 

Copyright 2003-2011 SSTRAN  All Rights Reserved.

email: info@sstran.com